When we bought our house in October, 2015, the red brick fireplace looked like this:
For Coat 2, I used the same 6:1 ratio and started painting again. I started at the top of the fireplace and took the picture below so you can see the difference between Coat 2 (at the top of the image) and Coat 1 (at the bottom of the image).
I do have a little more to do; I need to paint the trim piece around the fireplace and I am considering painting the mantel. I'll keep you posted.
Amaze Me Monday @ Dwellings
Make It Pretty Monday @ The Dedicated House
Inspire Me Tuesday @ A Stroll Thru Life on Tuesday
Talk of the Town Link Party @ Beyond the Picket Fence on Tuesday
Wow Us Wednesdays @ Savvy Southern Style on Tuesday evening
and the kitchen looked like this:
We tore out the kitchen and now it looks like this:
There have been ongoing projects that I will post as they are finished but for right now, I have been working on my goal to whitewash the fireplace.
I did Google "whitewashing the fireplace" and watched several videos. I wanted to start the project at the beginning of the week while my husband was gone. That would give me several days to perfect it before he returned.
My first step was to clean the fireplace brick thoroughly with a mixture of blue Dawn and water. I simply sprayed it on and wiped it off with a clean rag.
In the videos I watched, they were using a paint wash of 5 parts water to 1 part paint. At Sherwin Williams, the owner suggested a use 6:1 just to make sure it wasn't too white. I liked that idea, I figured I could easily give it multiple coats. But knew I couldn't take it off.
I used a two inch brush to apply the whitewash. The brush was about the width of the bricks. I did not paint the grout. I wanted to see how it looked without painting the grout. Keep a rag handy in case the paint runs. It is very fluid since mixing it with water. The brick really absorbs the paint mixture. I also used drop cloths over the mantel, the hearth and the floor.
Here's how it looked as I applied Coat 1:
You can see the red paint bucket below that I used. It was perfect because it had a handle I could easily hold plus it had a magnet so the brush would snap to it when I needed it to (all from Sherwin Williams).
Coat 1 took a little longer because I had the large hearth to paint (about 5-6 hours).
Here's a closeup of Coat 1. I think I could have used a mixture of 5:1 for better coverage. I let it dry overnight to see the look after drying. The red brick had more of a pinky look and needed more plaint. I also wanted the dark brick lighter.
For Coat 2, I used the same 6:1 ratio and started painting again. I started at the top of the fireplace and took the picture below so you can see the difference between Coat 2 (at the top of the image) and Coat 1 (at the bottom of the image).
When I was applying Coat 2, I did paint some bricks 3-4 times as I was going along. It was just a judgment call for the look I was wanting. You kind of get braver by the second day. I bought way too much paint. I think I could have gotten by with a quart of white paint. Can you see the difference between Coat 1 and Coat 2?
Now it is all dry and I am happy with the look. Don't think I will paint the grout at this time.
I do have a little more to do; I need to paint the trim piece around the fireplace and I am considering painting the mantel. I'll keep you posted.
Thanks for stopping by for another day of Life in Kentucky - Judy.
Linking to: